VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Repairing Kustom Amps » Kustom PA 300-5 and 150 bass combo chassis mounting screws (what size?)
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
Kustom PA 300-5 and 150 bass combo chassis mounting screws [message #27634] Sun, 12 January 2020 19:29 Go to next message
ScottyBeerwolf is currently offline  ScottyBeerwolf
Messages: 3
Registered: November 2019
Junior Member
hi guys i need some mounting screws for both of my amps and they are too big to drag into the local ACE hardware. can anyone give me the correct size for these bad boys?
thanks

Report message to a moderator

Re: Kustom PA 300-5 and 150 bass combo chassis mounting screws [message #27636 is a reply to message #27634] Tue, 14 January 2020 07:58 Go to previous message
stevem is currently offline  stevem
Messages: 4773
Registered: June 2004
Location: NY
Senior Member
The needed chassis screws are 10-32 Phillips head, 1.1/4" long should do fine

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: KUSTOM - Hustler and Commander
Next Topic: Kustom 250-4
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Fri Nov 01 01:07:35 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software