VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Repairing Kustom Amps » Cant remember washer placement
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
Cant remember washer placement [message #28196] Wed, 28 April 2021 16:21 Go to next message
DocWaxham is currently offline  DocWaxham
Messages: 46
Registered: October 2018
Member
What is the washer placement for the front panel inputs and preamp boards. Took out preamp boards to work on stepped away totally lost it. I feel pretty silly. Thanks.

Report message to a moderator

Re: Cant remember washer placement [message #28197 is a reply to message #28196] Thu, 29 April 2021 05:47 Go to previous message
stevem is currently offline  stevem
Messages: 4773
Registered: June 2004
Location: NY
Senior Member
There's a serrated star type washer that goes on the inside wall for every pot and input or foot switch jack and on the front side of the amp there's a flat washer for all of the above.

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: K100-2
Next Topic: Power caps
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Sat Nov 02 05:36:58 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software