VintageKustom.com: Repairing Kustom Amps

Home » VintageKustom.com » Repairing Kustom Amps » Fixing Up a K200-B1

Show: Today's Messages :: Polls :: Message Navigator

Fixing Up a K200-B1 [message #27593]

Sun, 17 November 2019 19:13

DeadKoby
Messages: 35
Registered: August 2017
Location: Cleveland, OH

Member

Hi guys, fortunately, I know what I'm doing, so I won't be begging for silly stuff. One of the 3 15" CTS (bass) drivers is AWOL, and I figured someone either would want to sell me one, or had a recommendation for an aftermarket replacement driver.

All your electrons are belong to us.

Report message to a moderator

Re: Fixing Up a K200-B1 [message #27594 is a reply to message #27593]

Mon, 18 November 2019 05:56

stevem
Messages: 4775
Registered: June 2004
Location: NY

Senior Member

You need to turn up a good used one or get that reconed because no one makes a off the shelf 16 ohm bass driver which is what those are.

Report message to a moderator

Re: Fixing Up a K200-B1 [message #27595 is a reply to message #27593]

Mon, 18 November 2019 12:03

DeadKoby
Messages: 35
Registered: August 2017
Location: Cleveland, OH

Member

I've located a good used one. I can't re-cone one that isn't there at all. Someone removed it from the cabinet years ago.

Weber DOES make a 16ohm 15" bass driver BTW. As an amp tech/dealer, I'm always looking to preserve originality and repair things on a budget.

If you ever need a "weird" guitar/bass speaker, http://tedweber.com is the place to go. I kept digging in hopes of an original type.

All your electrons are belong to us.

Report message to a moderator

Re: Fixing Up a K200-B1 [message #27596 is a reply to message #27595]

Tue, 19 November 2019 05:59

stevem
Messages: 4775
Registered: June 2004
Location: NY

Senior Member

I need to look for you as I may still have a good CTS bass driver or two when I swapped in EVMs in one of may cabinets.

Report message to a moderator

Re: Fixing Up a K200-B1 [message #27598 is a reply to message #27593]

Thu, 21 November 2019 16:45

DeadKoby
Messages: 35
Registered: August 2017
Location: Cleveland, OH

Member

Thanks, but the Job is done! I found a gent in Kansas that had one, and it's arrived here, been installed, and ready to rock.

If you wish to follow the Saga, you can find it on my YouTube Channel DeadKoby

All your electrons are belong to us.

Report message to a moderator

Previous Topic:	Adding A Spring Reverb Tank To A K100-1 50 Watt
Next Topic:	proud new owner of a Kustom Kombo organ needs a little help

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Wed Nov 13 16:27:25 EST 2024