VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » VintageKustom.com » Repairing Kustom Amps » A-4 Repair (Unwanted distortion)
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Re: A-4 Repair [message #26514 is a reply to message #26502] Tue, 30 January 2018 12:07 Go to previous messageGo to previous message
stevem is currently offline  stevem
Messages: 4773
Registered: June 2004
Location: NY
Senior Member
Thanks for sending me those shots of your 702 board, and all I can say is it's a mess, but at least the good news is that your not blowing any fuses, which by the way I hope are the right amperage!?

Those 4 added resistors ( paired in series for 39.8k ohms ) with the 4.7 uf cap in the middle to ground should not be there in regards to the schematic for a 702 board, however a 703 board does have a 39k resistor with a cap going to ground.

The 702 board does however have two 3900 ohm resistors.

The first thing I would do is remove those 4 resistors and that cap and then see how the rest of the board looks in relation to the schematic.
Those .22 ohm and .82 ohm white box resistors in series are ok for now, so leave then as is until we this messed up board working better for you!

[Updated on: Tue, 30 January 2018 12:30]

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Kustom 300 PA head needs repair
Next Topic: Kombo I organ keyboard contacts access
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Sun Nov 03 11:57:47 EST 2024