VintageKustom.com: Repairing Kustom Amps

Home » VintageKustom.com » Repairing Kustom Amps » Kustom 50-2 Reverb (Potentiometer Repair)

Show: Today's Messages :: Polls :: Message Navigator

Kustom 50-2 Reverb [message #28557]

Tue, 26 April 2022 06:56

jammy5152
Messages: 62
Registered: May 2018
Location: Georgia

Member

I bought a push/pull potentiometer off EBay and disassembled my broken Vib / Tremelo pot from my 50-2 amp and installed the parts from the new pot into the old pot body ( the 3 solder terminals on the new one did not line up with the board holes ) and re-soldered it back to the board...cleaned all pots and installed 3 prong cord...cut shaft of new pot ( to long) ...installed temporary knob with screw until I find one that looks like Kustom knob(screw clamp knob) ....Works great...
Reverb seems to be not deep enough though... Any thoughts....Cleaned RCA JACKS....REVERB echos when amp is moved a little...

[Updated on: Tue, 26 April 2022 13:42]

Report message to a moderator

[Message index]

Kustom 50-2 Reverb

By: jammy5152 on Tue, 26 April 2022 06:56

Previous Topic:	Kustom 50-2 Amp Ground Cord
Next Topic:	Reverb K50-2 Reverb Repair

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Thu Nov 14 05:27:32 EST 2024