VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Repairing Kustom Amps » kustom k200b-2
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
kustom k200b-2 [message #8673] Sun, 17 June 2007 08:07 Go to next message
alexzander182 is currently offline  alexzander182
Messages: 2
Registered: June 2007
Junior Member
I have a high hum sound.... what can I do to resolve it?
thanks

Report message to a moderator

Re: kustom k200b-2 [message #8676 is a reply to message #8673] Mon, 18 June 2007 06:30 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4758
Registered: June 2004
Location: NY
Senior Member
A hum, would be frequency wise below the low E string on a guitar, so are you saying the tine you have is above that? and is this tone there with all the controls turned down and nothing pluged into an input?

Report message to a moderator

Re: kustom k200b-2 [message #8678 is a reply to message #8676] Wed, 20 June 2007 23:26 Go to previous messageGo to next message
alexzander182 is currently offline  alexzander182
Messages: 2
Registered: June 2007
Junior Member
the hum change....with or without my guitar.

I'll like to add a sound clip. what can I do?

Report message to a moderator

Re: kustom k200b-2 [message #8679 is a reply to message #8673] Thu, 21 June 2007 06:32 Go to previous message
stevem is currently offline  stevem
Messages: 4758
Registered: June 2004
Location: NY
Senior Member
Hi, since you can not discribe the problem in any minor techical terms I can only deduce that you would not be in a position to fix the amp yourself.Anything along the lines of the problem you are discribing will be a job for a repair tech, so a trip to a shop is in order.

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: K100 cord replacement / switch wiring
Next Topic: A couple of technical question concerning my Charger
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Sat Aug 24 04:46:36 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software