VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » VintageKustom.com » Replacement Part Suggestions » help to identify proper 250v slow blow AC fuse for 72 coupe? (needing spec confirmation.)
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Re: help to identify proper 250v slow blow AC fuse for 72 coupe? [message #26780 is a reply to message #26779] Mon, 02 July 2018 08:00 Go to previous message
stevem is currently offline  stevem
Messages: 4747
Registered: June 2004
Location: NY
Senior Member
The proper fuse for your amp would be a Littlefuse type 218 series 5 x 20mm in the amperage stated on the back of the amp.
A fuse like this can be had from Newark electronics part number 26k8060 for a 4 amp fuse.
One thing to note hear is that a fuse in a tube type amp does not blow out for no reason, you likely have a bad output tube that took the fuse out in the first place!
The way to check this if you choose to not take it to a tech is to pull all of the output tubes out , install a new fuse and then re-install the output tubes one by one until the fuse blows again , then you have found the bad tube.
This of course means you will need a hand full of new fuses to test with.
In a pinch you can use a fast blow type fuse rated at 1 amp more then what the amp calls for in a slow blow type fuse.
[Message index]
 
Read Message
Read Message
Previous Topic: K200-B2 original speakers
Next Topic: Switches that might rebuild bad rotary switches
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Sat Jun 29 02:10:13 EDT 2024