VintageKustom.com: Repairing Kustom Amps

Home » VintageKustom.com » Repairing Kustom Amps » Kustom K100CB

Show: Today's Messages :: Polls :: Message Navigator

Kustom K100CB [message #2370]

Tue, 14 January 2003 01:11

Tom
Messages: 1
Registered: January 2003

Junior Member

Hello I have a K100CB amp serial # 53947 that turns on but has little signal to output the power amp section works and voltages are ok but i dont have the 8v for the preamp present and havent been able to locate the bad part or parts . I hope some one familiar with this amp could help . I have the correct schematis for it also . PS i have checked the to3 cased transistors and all transistors caps and resistors on power board and also on both preamp boards i know im missing something . Thanks Tom

Report message to a moderator

Re: Kustom K100CB [message #2371 is a reply to message #2370]

Tue, 14 January 2003 07:35

stevem
Messages: 4772
Registered: June 2004
Location: NY

Senior Member

Hi. I am not familar with the what the letters denote at the end of the k100.I have a100 guitar head singal channel, and I have a bass head schematic two channel(guitar head with out effects would be the same) What is your head I can probibly help.

Report message to a moderator

Previous Topic:	rectifier
Next Topic:	PA-10 Schematic help please

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Mon Oct 07 17:38:16 EDT 2024