VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Replacement Part Suggestions » 212 cabinet (speakers)
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
212 cabinet [message #26318] Sun, 24 September 2017 21:35 Go to next message
shawncfc is currently offline  shawncfc
Messages: 14
Registered: August 2016
Location: ohio
Junior Member
Hi i was thinking of picking up a kustom silver 212 cabinet to use for bass. anyone ever put in some new 12 inch bass speakers in a cab and how did it sound.

Report message to a moderator

Re: 212 cabinet [message #26319 is a reply to message #26318] Mon, 25 September 2017 06:09 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4775
Registered: June 2004
Location: NY
Senior Member
I play Bass and my first Kustom was a K100 piggie back with 2-12" s and it sounded great and would surly blow away a 2-12 Fender Bassman!

There are many good 12" Bass drivers that would work with the internal volume of that cabinet , but if your going to use a k100 head they want a 8 ohm load which means using 2 16 ohm drivers and that's where the hang up is as there are not many 12" 16 ohm drivers to pick from that will work for Bassi in that size cabinet!

My two picks would be the off the shelf Eminence Man-O-war driver in 16 ohms, or call Weber and have them put you together a Bass driver.

Report message to a moderator

Re: 212 cabinet [message #26322 is a reply to message #26319] Mon, 25 September 2017 13:28 Go to previous messageGo to next message
shawncfc is currently offline  shawncfc
Messages: 14
Registered: August 2016
Location: ohio
Junior Member
I have the k200 b head. i am going to wire it either 4 or 8 . depends on if i decide i want to add another cabinet or not . Ill probably go with 4 ohm

Report message to a moderator

Re: 212 cabinet [message #26324 is a reply to message #26318] Tue, 26 September 2017 06:03 Go to previous message
stevem is currently offline  stevem
Messages: 4775
Registered: June 2004
Location: NY
Senior Member
Well using a K200 head changes everything!

In that case I would use 2 Eminence Basslite S2012 drivers that are 8 ohms and will work well with the 2-12" size cab wired in parallel which wil give the needed 4 ohm load on the head.

The only fly in the ointment is that two 8 ohm driver can not be wired into a 8 ohm load, so if you might run another cab then that will need to be drivien off of a separate power amp.

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: Kustom III Lead 1975, PC Board 5065
Next Topic: Need cord winding hook
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Wed Nov 13 20:23:20 EST 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software