Kustom 200 Questions [message #4621] |
Wed, 04 August 2004 04:49 |
xbenjaminjohnx
Messages: 2 Registered: August 2004
|
Junior Member |
|
|
Im in the proces of purchasing a 200 head. The store im purchasing it from says its a 200 watt head, but i had heard elseware that the 200's were all 100 watts. can anyone confirm or deny this?
Im not sure what 200 model this is, its 4 channels, with 16 knobs on the front, gold T&R. If anyone can help me figure out more about this amp, such as suggested ohms, RMS output, or anything else, id be very greatful.
Also did kustom release a 200 PA head? I was thinking this might be a 4 channel PA head in reality...
Thanks for your help!
ben
|
|
|
|
|
Re: Kustom 200 Questions [message #4625 is a reply to message #4624] |
Wed, 04 August 2004 20:35 |
QModer
Messages: 413 Registered: June 2003
|
Senior Member |
|
|
You'll have a reverb control in each channel as opposed to the bright deep switch found on bass amps. Some bass amps even had and entire bright deep channel as well as the bright deep switch in both channels. Other than that the PA head circuit is about the same as the bass amps. I really like that bright deep switch on deep for bass myself. I don't know how the PA head would sound with out it for bass as I've never tried it. I know the Kustom PA's over all pushed the midrange frequencies more.
|
|
|