VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Comment Board » Introduction + Request (Kustom 88 Piano) (Baldwin / Kustom 88 Piano)
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
Introduction + Request (Kustom 88 Piano) [message #27690] Sat, 29 February 2020 12:09 Go to next message
TelRay is currently offline  TelRay
Messages: 2
Registered: February 2020
Junior Member
Greetings and salutations y'all,
I've found this forum after a lot of unsuccessful searching for schematics for the Baldwin Kustom 88 Electric Piano, soy guys are kind of my last hope Smile
That search included: emailing people selling a piano like this, people who uploaded youtube videos about it, contacting Kustom themselves, etc.
The problem is the following:
I got this piano a couple of weeks ago and a resistor on the Power SupplyPCB was blown
The resistor is unreadable (no color code left)
I know this resistor acts as a voltage divider for the -25VDC rail sending some of that voltage to ground before sending the remaining voltage to the MOTOROLA ICs 514-063227 (unfortunately I have not been able to find the specs of this ICs, they seem to have been custom made)
What i need to know is the value of this resistor (either a photo of a working unit's circuit or a schematic would help)
Thank you!

PS: unfortunately i cannot post a link until i reach 10 messages so here is the incomplete link to the circuit's photo, identifying the missing resistor (easy to spot with all that burnt material around)

//i.ibb.co/DCmXwcM/IMG-0560.jpg

Report message to a moderator

Re: Introduction + Request (Kustom 88 Piano) [message #27697 is a reply to message #27690] Mon, 02 March 2020 07:27 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4775
Registered: June 2004
Location: NY
Senior Member
You can get a schematic for that from music parts for 20 bucks and then we can help you.

Report message to a moderator

Re: Introduction + Request (Kustom 88 Piano) [message #27699 is a reply to message #27697] Mon, 02 March 2020 08:51 Go to previous messageGo to next message
TelRay is currently offline  TelRay
Messages: 2
Registered: February 2020
Junior Member
thank you Steven for suggesting MUSIC PARTS. Unfortunately I have only found "Kustom K88 Electronic Piano Owners/User Manual / Contents: An owners guide for the operation of the equipment"
No Schematics

Report message to a moderator

Re: Introduction + Request (Kustom 88 Piano) [message #27700 is a reply to message #27690] Mon, 02 March 2020 12:41 Go to previous message
stevem is currently offline  stevem
Messages: 4775
Registered: June 2004
Location: NY
Senior Member
if that indeed has a regulated power supply then that burned up resistor is likely the one that sets the regulators voltage output limit.
In that case the resistor being toast means that the regulator is toast also.

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: Where and how to adjust the bias of a Kustom Studio 4 valve
Next Topic: Kustom V Mixer ( flat base unit )
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Sat Nov 16 15:57:18 EST 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software