VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Repairing Kustom Amps » Kustom 150 speaker question (My speakers dont seem blown but crackling)
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
Kustom 150 speaker question [message #26900] Wed, 22 August 2018 14:09 Go to next message
rickdroit is currently offline  rickdroit
Messages: 7
Registered: August 2018
Junior Member
Hi folks, im new to the forum, I recently bought a Kustom 150 head and cabinet, the output is a strange arrangement with a four prong xlr looking female where the usual tremolo/reverb jack is. .and then the output says 6ohm to 8 ohms, but in the cabinet there are two original KEI 10 ohm speakers. . is this correct for this amp? thank you

Report message to a moderator

Re: Kustom 150 speaker question [message #26904 is a reply to message #26900] Thu, 23 August 2018 02:45 Go to previous messageGo to next message
rickdroit is currently offline  rickdroit
Messages: 7
Registered: August 2018
Junior Member
Ok, obviously some of the paint had worn off, they are 16 ohm speakers, can anyone tell me if A.) this the correct configuration for this amp, and B. does anyone know what the deal is with the four prong female to the left of the center input jack on the amp? Ive never seen this, is it factory?

Report message to a moderator

Re: Kustom 150 speaker question [message #26906 is a reply to message #26900] Thu, 23 August 2018 06:08 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4775
Registered: June 2004
Location: NY
Senior Member
Is this a metal face K 150, or a plexiglass face?

Report message to a moderator

Re: Kustom 150 speaker question [message #26907 is a reply to message #26900] Thu, 23 August 2018 09:20 Go to previous messageGo to next message
chicagobill
Messages: 2006
Registered: April 2003
Senior Member
My guess would be a metalfront, I don't think that there were any 150 plexi heads were there?

The xlr jack would be the foot switch jack.

Report message to a moderator

Re: Kustom 150 speaker question [message #26908 is a reply to message #26906] Thu, 23 August 2018 12:05 Go to previous messageGo to next message
rickdroit is currently offline  rickdroit
Messages: 7
Registered: August 2018
Junior Member
It's Metal

Report message to a moderator

Re: Kustom 150 speaker question [message #26909 is a reply to message #26907] Thu, 23 August 2018 12:06 Go to previous messageGo to next message
rickdroit is currently offline  rickdroit
Messages: 7
Registered: August 2018
Junior Member
Ok, that's what I thought about the 4 prong xlr, (ive just only ever seen 3 prong ones), thanks so much

Report message to a moderator

Re: Kustom 150 speaker question [message #26910 is a reply to message #26900] Thu, 23 August 2018 12:23 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4775
Registered: June 2004
Location: NY
Senior Member
Bill the SC 150 series amps are plexiglass face and this is when they started adding the choke in the power supplies like the metal face amps carried on with.

Report message to a moderator

Re: Kustom 150 speaker question [message #26912 is a reply to message #26900] Thu, 23 August 2018 23:49 Go to previous message
chicagobill
Messages: 2006
Registered: April 2003
Senior Member
Yeah, 150 SC. Small Combo, not a head and cabinet.

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: K200B-2 tremolo is weak and pops when switched
Next Topic: Kustom 300 PA head needs repair
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Mon Nov 11 21:20:39 EST 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software