VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » Classified Ads » Wanted » CTS cabinet handles (Looking for three cab handles just the plastic part)
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
CTS cabinet handles [message #25745] Sat, 07 January 2017 11:13 Go to next message
dnlking1 is currently offline  dnlking1
Messages: 10
Registered: December 2016
Junior Member
I have two CTS four twelve columns and three of the four have the plastic parts missing from the handles. Anyone know if these are available anywhere ?

[Updated on: Sat, 07 January 2017 11:14]

Report message to a moderator

Re: CTS cabinet handles [message #25795 is a reply to message #25745] Sat, 21 January 2017 21:59 Go to previous messageGo to next message
Snodgrass is currently offline  Snodgrass
Messages: 139
Registered: January 2008
Location: Bartlesville, OK
Senior Member
Have you already looked at Brettuns Village? I think they're the sch10's.

Report message to a moderator

Re: CTS cabinet handles [message #25796 is a reply to message #25795] Sat, 21 January 2017 22:39 Go to previous messageGo to next message
dnlking1 is currently offline  dnlking1
Messages: 10
Registered: December 2016
Junior Member
I actually shot an email to Kustom and they got back and gave me a part number and the price was $20 each for the complete handle.! Thanks for the reply !

Report message to a moderator

Re: CTS cabinet handles [message #25797 is a reply to message #25796] Sun, 22 January 2017 11:01 Go to previous messageGo to next message
pleat is currently offline  pleat
Messages: 1454
Registered: June 2004
Location: Belding, Mi
Senior Member
The new kustom handles might be wider than the originals, so you will want to ask kustom before ordering.
pleat

Report message to a moderator

Re: CTS cabinet handles [message #25798 is a reply to message #25797] Sun, 22 January 2017 11:50 Go to previous messageGo to next message
dnlking1 is currently offline  dnlking1
Messages: 10
Registered: December 2016
Junior Member
I sent him pictures of my vintage CTS cabs and detailed pix of the handles, I also told him it was the old rolled and pleated cabs. The contact at Kustom is Bill O'Neil and here is the part number he sent me ....Part Number - 3490KCUPE11Q Description - Handle.
Here is his email addy..... boneil@hansermg.com

Report message to a moderator

Re: CTS cabinet handles [message #25799 is a reply to message #25798] Sun, 22 January 2017 16:15 Go to previous messageGo to next message
Snodgrass is currently offline  Snodgrass
Messages: 139
Registered: January 2008
Location: Bartlesville, OK
Senior Member
i can't find anything by that part number did you get the measurements?

Report message to a moderator

Re: CTS cabinet handles [message #25800 is a reply to message #25799] Sun, 22 January 2017 17:08 Go to previous messageGo to next message
dnlking1 is currently offline  dnlking1
Messages: 10
Registered: December 2016
Junior Member
No I did not measure them And really do not care much now, I just sold the PA system last friday and printed out the email from Kustom and gave it to the guy that bought it ! He can call the guy at kustom and order them. Like I said , I asked them at Kustom if those vintage handles wre available, sent pictures to make sure and this Bill O'Neil got right back and said yes they were, his phone number is 859-817-7103 you can call him tomorrow ! I went straight to Guitar Center and bought a Marshall CODE 50 and a Fender Campion 100 !!! So all in all I am a happy camper !

Report message to a moderator

Re: CTS cabinet handles [message #25849 is a reply to message #25800] Fri, 03 February 2017 16:31 Go to previous messageGo to next message
irish77060 is currently offline  irish77060
Messages: 49
Registered: January 2017
Location: Atlanta, GA
Member
The newer Kustom handles are slightly off from the old ones, but when installed cover any holes.

Keep On Truckin'

Report message to a moderator

Re: CTS cabinet handles [message #25850 is a reply to message #25849] Fri, 03 February 2017 17:06 Go to previous message
dnlking1 is currently offline  dnlking1
Messages: 10
Registered: December 2016
Junior Member
It does not matter anymore, I sold the whole thing both CTS and the head !

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: Red Cabinet
Next Topic: Amp heads wanted
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Fri Nov 01 01:20:36 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software