1974 Kustom 1-b bass amp [message #26982] |
Thu, 20 September 2018 19:54 ![Go to next message Go to next message](/FUDforum/theme/vk30/images/down.png) |
Hugh Andrews
Messages: 4 Registered: September 2018
|
Junior Member |
|
|
Dug this amp out after many years of none use and it had 2 problems. 1) popping and crackling 2) and each note fades distorted (buzzing) at any volume. I replaced the electrolytic caps with 4700uf 50v caps instead of the 1900uf 40v caps as per suggestions from this forum and that solved problem #1. Notes are loud and strong, but as they decay it's distorted.I tried different guitars and cables. I disconnected the amp from the speaker and drove the speaker with another amp. It did not distort. So the problem is not in the speaker or cabinet. Does this sound like a a problem in the power section or the preamp? Or possibly the transformer? Also I cannot find a schematic. Any suggestions?
|
|
|
Re: 1974 Kustom 1-b bass amp [message #26984 is a reply to message #26982] |
Fri, 21 September 2018 05:56 ![Go to previous message Go to previous message](/FUDforum/theme/vk30/images/up.png) ![Go to next message Go to next message](/FUDforum/theme/vk30/images/down.png) |
stevem
Messages: 4763 Registered: June 2004 Location: NY
|
Senior Member |
|
|
Hello and welcome!
Sorry that your post could not be loaded right onto the site, but we have been getting very heavy spam ( daily ) as of late and needed to make a change where new members first five post need to be approved first by a moderator.
What are the PC numbers on the circuit boards in the amp?
From what I have seen of pictures of this amp it looks like the preamp board might be a PC 5066, or 5067, as this is where I think your issue now is.
The power transformer has nothing to do with your issue at this point.
[Updated on: Fri, 21 September 2018 07:10] Report message to a moderator
|
|
|
|
|
|
|