VintageKustom.com: Repairing Kustom Amps

Home » VintageKustom.com » Repairing Kustom Amps » Kustom 150-2

Show: Today's Messages :: Polls :: Message Navigator

Re: Kustom 150-2 [message #6863 is a reply to message #6861]

Wed, 05 April 2006 21:21

LesS
Messages: 477
Registered: December 2002

Senior Member

At five you are at or close to the maximum clean output of the amp. Generally on the Kustoms, you hit full volume around 4. It is 75 watts RMS which might not be enough for you depending on your speakers. What speakers and what cabinet do you have? What ohms are the speakers?
A lot of cabinets have trouble with bass notes that low. Also try running the bass control at 12 o'clock or lower.
-Les S

Report message to a moderator

[Message index]

		Kustom 150-2 By: doctrjazz on Wed, 05 April 2006 18:06
		Re: Kustom 150-2 By: LesS on Wed, 05 April 2006 21:21
		Re: Kustom 150-2 By: stevem on Thu, 06 April 2006 07:50
		Re: Kustom 150-2 By: KustomKyle on Thu, 06 April 2006 09:38
		Re: Kustom 150-2 By: doctrjazz on Thu, 06 April 2006 10:43
		Re: Kustom 150-2 By: stevem on Thu, 06 April 2006 12:34
		Re: Kustom 150-2 By: doctrjazz on Thu, 06 April 2006 14:48
		Re: Kustom 150-2 By: stevem on Mon, 10 April 2006 07:54
		Re: Kustom 150-2 By: doctrjazz on Mon, 10 April 2006 12:27
		Re: Kustom 150-2 By: doctrjazz on Mon, 10 April 2006 12:31
		Re: Kustom 150-2 By: stevem on Mon, 10 April 2006 12:49
		Re: Kustom 150-2 By: doctrjazz on Wed, 12 April 2006 16:19

Previous Topic:	Short circuitinga 4-pin-male-out when no Footcontrols available
Next Topic:	New guy-asking for your help!

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Jun 27 10:22:46 EDT 2024