gold 2x15 [message #26352] |
Mon, 02 October 2017 10:04 ![Go to next message Go to next message](/FUDforum/theme/vk30/images/down.png) |
shawncfc
Messages: 14 Registered: August 2016 Location: ohio
|
Junior Member |
|
|
Hey guys . Just picked up a gold 2x15 with the cts speakers. Will use it for bass. it has the taper from top tp bottom so I know its the 8 ohm cabinet that went with the k200 bass head.My question is what speaker would you guys recommend to replace the old cts ones? I want to run it at 8 ohms so i can add another cab it needed. i have looked at the Eminance basslight. Thanks
|
|
|
Re: gold 2x15 [message #26353 is a reply to message #26352] |
Mon, 02 October 2017 12:07 ![Go to previous message Go to previous message](/FUDforum/theme/vk30/images/up.png) ![Go to next message Go to next message](/FUDforum/theme/vk30/images/down.png) |
stevem
Messages: 4758 Registered: June 2004 Location: NY
|
Senior Member |
|
|
The problem with that driver is that it only goes down to 52hz which really does not even cover the E string, and it will be very dark also since it only goes up to 2.1khz, it's made to be used with a horn / tweeter!
I would go for a Beta 15A and deal with the extra 8 pounds of weight.
I would also lean towards wiring them in parallel for a 4 ohm load so the Head can output its full 100 wats RMS,if your going to run two cabinets I would do so then by means of another separate power amp run off of the rca jack on the K200 head.
300 watt power amps are dirt cheap these days especially if you pick one up used.
[Updated on: Mon, 02 October 2017 12:08] Report message to a moderator
|
|
|
|
|
|
|