VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » Classified Ads » Wanted » kustom k150-2 (transformer)
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
kustom k150-2 [message #17233] Mon, 25 June 2012 19:15 Go to next message
bertaire is currently offline  bertaire
Messages: 34
Registered: April 2012
Location: burbank california
Member
I need a power transformer for a k150-2. I have a transformer for a k100,will sell or trade, unless I can use it for the 150 . Dopes anyone know if that is possible ?

Report message to a moderator

Re: kustom k150-2 [message #17234 is a reply to message #17233] Mon, 25 June 2012 20:41 Go to previous messageGo to next message
pleat is currently offline  pleat
Messages: 1454
Registered: June 2004
Location: Belding, Mi
Senior Member
The voltages for the K150-2 is 39.5 volts. The K100-1&2 voltages are 39.5 and the SC K100 are also 39.5 volts.
pleat

Report message to a moderator

Re: kustom k150-2 [message #17236 is a reply to message #17233] Tue, 26 June 2012 11:14 Go to previous messageGo to next message
bertaire is currently offline  bertaire
Messages: 34
Registered: April 2012
Location: burbank california
Member
Thanks Pleat, If I understand you they are all 39.5 volts and should be interchangeable. The transformer I bought was said to come from a vintage 100 , I compared the two and the 150's magnet seems to be a little wider. Here are the numbers on the transformer I bought ...019-7002-01 and below it 1005824. I would like to put it in the completely dead 150 I just bought. Does it mean my 150 on the outside will now be a 100 on the inside assuming the transformer I bought is in fact a 100. Thank you in advance for your guidance.

Report message to a moderator

Re: kustom k150-2 [message #17238 is a reply to message #17236] Tue, 26 June 2012 12:44 Go to previous messageGo to next message
Kustom_Bart is currently offline  Kustom_Bart
Messages: 601
Registered: October 2010
Location: Greenville, MichiGUN
Senior Member
It should still be a 150 because of the pre amp board and power section. As long as you are feeding it the proper voltage, it will be a 150.

Report message to a moderator

Re: kustom k150-2 [message #17239 is a reply to message #17233] Tue, 26 June 2012 15:01 Go to previous message
bertaire is currently offline  bertaire
Messages: 34
Registered: April 2012
Location: burbank california
Member
Knowledge is power as they say but sharing that knowledge sets you apart. Thank you.

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: Black 3-12 cab
Next Topic: Pickguard for K200A
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Sat Nov 16 17:01:56 EST 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software