VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Repairing Kustom Amps » loud pop early K200A-1 (when plugging into left channel)
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
loud pop early K200A-1 [message #19736] Sun, 15 December 2013 00:00 Go to previous message
kustomhead is currently offline  kustomhead
Messages: 121
Registered: April 2012
Location: Redding, Ca
Senior Member
When plugging a guitar cord into the both hi and low inputs on the left channel there's a loud distorted pop/noise as it first makes contact with the jack. Also when I click on my boost pedal it makes a loud pop. The right channel works fine. Could it have to do with the 200U Memcor or GE .0047 50 volt cap that bridges the hi and low inputs? Anybody have this phenom? It's a very early A model 4-150-1 with serial# 18383.

[Updated on: Sun, 15 December 2013 00:19]

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: 3 loose wires
Next Topic: is ok to cut vent holes under amp head?
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Sat Jun 22 08:47:14 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software