VintageKustom.com: Replacement Part Suggestions

Home » VintageKustom.com » Replacement Part Suggestions » FOOT SWITCH QUESTION (4 PIN XLR )

Show: Today's Messages :: Polls :: Message Navigator

FOOT SWITCH QUESTION [message #20243]

Tue, 04 March 2014 10:20

GENO6860
Messages: 3
Registered: March 2014

Junior Member

Hello, I am looking at an Kustom amp head that has the Harmonic Clipper on it. There is not a model number on the front as my K-200 or my K-150 Combo has. The tag on the back is stamped in the MODEL zone: 3-15L-4. The owner says he cannot test the effects (Trem, Harmonic Clipper) as he doesn't have the foot switch. The back has the 4 pin XLR plug (female) in it. I have seen one 4 pin wiring diagram on the forum here that is: Switchcraft A4M plug should work.
Pin 1 = ground
Pin 2 + Positive voltage for the lights on the lighted footswitch.
Pin 3 = Trem/Vib
Pin 4 = Reverb

My question is how would a feller wire a set-up that does the switching on this amp?

Report message to a moderator

[Message index]

		FOOT SWITCH QUESTION By: GENO6860 on Tue, 04 March 2014 10:20
		Re: FOOT SWITCH QUESTION By: chicagobill on Tue, 04 March 2014 13:05
		Re: FOOT SWITCH QUESTION By: pleat on Tue, 04 March 2014 14:34
		Re: FOOT SWITCH QUESTION By: pleat on Tue, 04 March 2014 14:35
		Re: FOOT SWITCH QUESTION By: GENO6860 on Tue, 04 March 2014 15:33
		Re: FOOT SWITCH QUESTION By: chicagobill on Tue, 04 March 2014 16:30
		Re: FOOT SWITCH QUESTION By: stevem on Wed, 05 March 2014 07:33
		Re: FOOT SWITCH QUESTION By: chicagobill on Wed, 05 March 2014 12:56
		Re: FOOT SWITCH QUESTION By: GENO6860 on Wed, 05 March 2014 14:04
		Re: FOOT SWITCH QUESTION By: stevem on Thu, 06 March 2014 06:43

Previous Topic:	Help with a Kustom 100 SC amplifier.
Next Topic:	K150 K250 K300 K600 Switch Replacement

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Jul 28 23:04:07 EDT 2024