VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Repairing Kustom Amps » JBL Speaker Polarity (phasing)
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
JBL Speaker Polarity (phasing) [message #67] Mon, 05 June 2000 11:56
artto
Messages: 9
Registered: June 2000
Junior Member
When upgrading to or matching other non-JBL drivers/cabinets with JBL drivers, remember that JBL has used a negative polarity convention. A positve connection to the positive (red) speaker terminal produces cone travel that moves inward (backwrad) first. You must reverse the connection of the lead wires to the speaker(s) in order for them to be phased properly with other manufacturer's drivers. JBL is finally changing this, but only on new model introductions.

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: Sick sounding cabinets
Next Topic: Recovering
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Sun Nov 03 19:47:02 EST 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software