VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Repairing Kustom Amps » Repair (Schematic K200B)
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Re: Repair [message #23918 is a reply to message #23916] Fri, 25 September 2015 09:16 Go to previous messageGo to previous message
OldSchool1 is currently offline  OldSchool1
Messages: 35
Registered: September 2015
Location: East Coast US
Member
the bassman speaker cab is a closed back. to hook up the meter across the speaker do you mean i have to open up the back of the cab and get at the back of the speaker itself and hook the meter leads to the speaker wire connectors? there are 2 speakers....so i would be measuring voltage across only one speaker?

any thoughts why the amp works after first turning it on and then plugging in the speaker cable and guitar? if the amp is oscillating at a high level wouldn't there always be the problem of no sound and the limiter bulb glowing bright? it just happens when the amp is turned on with the speaker cable plugged in. amp works fine if turned on first, and then speaker cable is plugged in after.

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Kustom Kombo II amplifier vs. Exp Pedal Output
Next Topic: K200b-2
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Thu Jul 18 23:59:34 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software