VintageKustom.com: Repairing Kustom Amps

Home » VintageKustom.com » Repairing Kustom Amps » Kustom 200 B1 (Volume switches on both channels goes very loud)

Show: Today's Messages :: Polls :: Message Navigator

Kustom 200 B1 [message #29090]

Mon, 21 August 2023 15:36

Steve R
Messages: 6
Registered: August 2023

Junior Member

This is my first post. I have a Kustom 200 B1 amp. With my bass volume switch all the way up, then start to turn the amp volume switch up. The volume starts off low then with a 1/16 of a turn the volume is very loud. I have to turn down the guitar switch way down. Any idea's what is wrong. The bass cabinet is 2-15s 4homs speakers wired in series gaining me 8ohms. Thanks

Report message to a moderator

Re: Kustom 200 B1 [message #29091 is a reply to message #29090]

Tue, 22 August 2023 08:08

stevem
Messages: 4775
Registered: June 2004
Location: NY

Senior Member

There's two channels in that K200 amp, does the volume control on each channel act the same way?

Your taking about volume controls by the way , not switch's.

Report message to a moderator

Re: Kustom 200 B1 [message #29092 is a reply to message #29091]

Wed, 23 August 2023 08:30

Steve R
Messages: 6
Registered: August 2023

Junior Member

I'm talking about the 2 volume controls on the amp. From low volume to very loud with just a touch of the volume knob. Both channels act the same. Thanks

Report message to a moderator

Re: Kustom 200 B1 [message #29093 is a reply to message #29092]

Wed, 23 August 2023 09:41

stevem
Messages: 4775
Registered: June 2004
Location: NY

Senior Member

So in that case both volume pot's are bad, and or there is a bad solder connection from the pot to the board it's mounted on.

Report message to a moderator

Re: Kustom 200 B1 [message #29094 is a reply to message #29091]

Wed, 23 August 2023 10:33

Steve R
Messages: 6
Registered: August 2023

Junior Member

The 2 volume knobs act the same. With the bass guitar turned up to 10. As I start to turn the volume knob up. It starts off low then very loud with just a touch of the volume knob. I have to turn down the guitar volume. Thanks

Report message to a moderator

Re: Kustom 200 B1 [message #29095 is a reply to message #29090]

Wed, 23 August 2023 11:41

stevem
Messages: 4775
Registered: June 2004
Location: NY

Senior Member

Yes, I understand what your saying and my reply to you stays the same.

The impeadence of your speaker cabinet does not come into play here, so it's irrelevant.

[Updated on: Wed, 23 August 2023 11:43]

Report message to a moderator

Re: Kustom 200 B1 [message #29096 is a reply to message #29095]

Wed, 23 August 2023 12:30

Steve R
Messages: 6
Registered: August 2023

Junior Member

Thanks for the info. I'm bringing the amp into the music shop later today to have them look at it. I will give them your thoughts on the problem

Report message to a moderator

Re: Kustom 200 B1 [message #29097 is a reply to message #29090]

Wed, 23 August 2023 12:50

chicagobill
Messages: 2006
Registered: April 2003

Senior Member

Is your bass active? (Does it have active electronics?)

Report message to a moderator

Re: Kustom 200 B1 [message #29103 is a reply to message #29097]

Mon, 28 August 2023 13:16

Steve R
Messages: 6
Registered: August 2023

Junior Member

Hi. No my bass is passive. Gibson SG. 1916 year. I spoke to the tech at the shop. He said its sounds like just dirty volume knob. So i sprayed them with electronic cleaner. It is working better. The volume increases slower. My plan is to spray it every few days. Thanks

Report message to a moderator

Re: Kustom 200 B1 [message #29104 is a reply to message #29090]

Mon, 28 August 2023 16:58

stevem
Messages: 4775
Registered: June 2004
Location: NY

Senior Member

Spraying it out every few days is not needed once the resistive trace grit has been flushed out of it.
What's needed to be sprayed in them now if they are working normal is a potentiometer lube spray, as this will stop the ware that made the grit and the cutting out in the first place.

Report message to a moderator

Re: Kustom 200 B1 [message #29105 is a reply to message #29104]

Tue, 29 August 2023 11:09

zedsalt
Messages: 65
Registered: March 2008

Member

I have a wah pedal that used to require far-too-often cleanings, which I'd always done using straight alcohol. A friend (local brick-and-mortar music store owner, repairman) recommended CAIG DeoxIT for the very reason you mentioned- dealing with the tiny scratches and pits left by grit that had been on the pots' contact strips when the knobs were turned. I've heard/read that there are different formulas of DeoxIT that shouldn't be used in different situations (a formula with a flammable ingredient on/in something carrying a considerable charge, for example...maybe the only example LOL). Is there a reason it shouldn't be used in this situation?

Report message to a moderator

Re: Kustom 200 B1 [message #29106 is a reply to message #29104]

Wed, 30 August 2023 09:42

Steve R
Messages: 6
Registered: August 2023

Junior Member

stevem wrote on Mon, 28 August 2023 16:58

Spraying it out every few days is not needed once the resistive trace grit has been flushed out of it.
What's needed to be sprayed in them now if they are working normal is a potentiometer lube spray, as this will stop the ware that made the grit and the cutting out in the first place.

Hi. Thanks for that info. I'll look for it. Thanks again. Steve R

Report message to a moderator

Re: Kustom 200 B1 [message #29107 is a reply to message #29090]

Wed, 30 August 2023 10:47

rodak
Messages: 516
Registered: October 2001
Location: Georgia

Senior Member

I second the request for advice on which of the DeOxit products to use for cleaning pots. The Caig website has a confusing and intimidating array of products - for instance, The "D-Series" is a "UNIQUE CONTACT/CONNECTOR TREATMENT, REJUVENATOR AND PROTECTOR", whereas the "G-Series" is a "CONTACT ENHANCER,CONDITIONER & PROTECTOR". So they both Protect, but one "rejuvenates" whereas the other "enhances" and "conditions". Hmmmm. oh, and there's the "S-Series", which is a "LUBRICANT & PROTECTANT FOR BETTER METAL ELECTRONIC CONNECTIONS & CONTACTS.". Hmmm, that sounds good, too, but apparently it doesn't "Clean" or "Condition", only lubes and protects. What to do, what to do?

Ahh, here we go - the "F-Series": "Removes Contaminants, Lubricates & Protects Moving/Sliding Contacts and Carbon-based Controls" That sounds like the ticket! $28 bucks for a 5oz can. Seems a bit pricey.

Anyone have any experienced opinions on the Caig products?

www.combo-organ.com

Report message to a moderator

Re: Kustom 200 B1 [message #29108 is a reply to message #29090]

Wed, 30 August 2023 12:27

stevem
Messages: 4775
Registered: June 2004
Location: NY

Senior Member

I will post a long reply on this whole subject tomorrow.

Yes, Caig products are the best.

Report message to a moderator

Previous Topic:	Kustom Amp Repair in Texas
Next Topic:	Sound problem on a Kustom lll Lead Head

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Sat Nov 16 12:53:09 EST 2024