Re: K200-B2 original speakers [message #25813 is a reply to message #25802] |
Sun, 29 January 2017 15:10 ![Go to previous message Go to previous message](/FUDforum/theme/vk30/images/up.png) ![Go to next message Go to previous message](/FUDforum/theme/vk30/images/down.png) |
stevem
Messages: 4768 Registered: June 2004 Location: NY
|
Senior Member |
|
|
All of the speakers / drivers I listed for you are for guitar which is what I thought you posted up that you played?
These are not Bass speakers / drivers , if you play Bass I will need to post different model speakers / drivers!
The will output very close to 100 watts of clean power into a 4 ohm load, or 50 watts of clean power into a 8 ohm load.
For home usage speakers that handle 50 to 75 watts of power will work and live just fine, if you need Bass speakers you can do a search and find many post on the site for that usage.
The Eminence speaker that you already have may be perfectly good for guitar if it's 8 ohms ,but I can not tell unless or untill you pull it and post up a picture of the cone,
A Eminence 1518 will have dull overtones as its frequency responce takes a nose dive right at 5K cycles, if you like chime in your guitar tone this speaker will not put out much of it!
Go look at its frequency responce chart on the Eminence site and then go look at the chart on the Jensen site for the C15N and compare.
You can always turn down uneeded treble with the tone controls, but if the speaker can't put it out in the first place your done!
[Updated on: Sun, 29 January 2017 15:20] Report message to a moderator
|
|
|