VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » VintageKustom.com » Comment Board » Kustom 3-15" cab with 2 speakers and 1 horn used for bass.
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Re: Kustom 3-15" cab with 2 speakers and 1 horn used for bass. [message #28942 is a reply to message #28936] Thu, 23 February 2023 20:22 Go to previous messageGo to previous message
rodak
Messages: 514
Registered: October 2001
Location: Georgia
Senior Member
I thought I had read that the volume of the 3x15 cabinet wasn't really large enough for the 3 15" speakers, so I've always figured maybe with just two speakers and a horn it would be more ideal. Of course, I suppose it depends on which speakers are inside. Has anyone ever done a Thiele-Small calculation for that cabinet and some of the offered speakers (JBL, Altec, CTS)?

Plus, if you use two such cabs (with 16ohm speakers), you'd be presenting a 4ohm load to the amp(at least, in the lower frequencies), which is the ideal(lowest) impedance the K200s are meant to drive. You could always wire in a pad to be able to dial in the horn if you like that, or just dial it out altogether. I'm not sure how risky adding the horn in would be, impedance-wise, so maybe that isn't a good idea.

The 3x15 rig was always so impressive - having two of those suckers, well.....


www.combo-organ.com
[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Kustom K300 PA head as Bass Amp
Next Topic: Kasino concert
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Wed Aug 21 18:28:23 EDT 2024