VintageKustom.com: Replacement Part Suggestions

Home » VintageKustom.com » Replacement Part Suggestions » 150 Combo Footswitch

Show: Today's Messages :: Polls :: Message Navigator

150 Combo Footswitch [message #27106]

Tue, 13 November 2018 18:52

Juiced
Messages: 3
Registered: April 2016
Location: South Carolina

Junior Member

Hello all.

Are there any photos or a model number of the footswitch that goes to the 1970 150 Combo?

Thanks!

Ed
The Cold Solder Joint.

Never let being a responsible adult get in the way of passion and curiosity.

Report message to a moderator

Re: 150 Combo Footswitch [message #27107 is a reply to message #27106]

Wed, 14 November 2018 13:24

chicagobill
Messages: 2006
Registered: April 2003

Senior Member

There are a number of 150 combos some have effects and some don't. If yours has the basic reverb and trem, it should use a standard two button switch with a stereo 1/4" plug connector.

As far as I remember, the original ones were round diecast domes, with two standard push on, push off switches.

Report message to a moderator

Re: 150 Combo Footswitch [message #27108 is a reply to message #27107]

Wed, 14 November 2018 14:07

Juiced
Messages: 3
Registered: April 2016
Location: South Carolina

Junior Member

Thank you for the info.

Mine is the K150-8.

I have one coming for a challenger, I will check to see it that one works on it.

Never let being a responsible adult get in the way of passion and curiosity.

Report message to a moderator

Re: 150 Combo Footswitch [message #27109 is a reply to message #27106]

Wed, 14 November 2018 16:39

rodak
Messages: 516
Registered: October 2001
Location: Georgia

Senior Member

Here's one:

https://www.ebay.com/itm/253896487687

I see them on eBay pretty regularly, they usually seem to go for $60-$70. I'd love to have one for my combos, but can't justify spending 1/2 to 1/3 what I paid for the amp on just a footswitch Wink

I see the single-button ones, they go for a LOT less (like $10-$20)

But yeah, functionally, most any 2-button passive switch with a TRS plug should do it.

www.combo-organ.com

Report message to a moderator

Re: 150 Combo Footswitch [message #27110 is a reply to message #27109]

Wed, 14 November 2018 16:41

rodak
Messages: 516
Registered: October 2001
Location: Georgia

Senior Member

Sorry, I think that link was wrong. Try this one:

https://www.ebay.com/itm/VINTAGE-KUSTOM-VIBRATO-REVERB-ROUND -AMP-FOOTSWITCH-/253896487687?nordt=true&orig_cvip=true& amp;rt=nc&_trksid=p2047675.m43663.l44720

www.combo-organ.com

Report message to a moderator

Re: 150 Combo Footswitch [message #27111 is a reply to message #27106]

Wed, 14 November 2018 17:17

Juiced
Messages: 3
Registered: April 2016
Location: South Carolina

Junior Member

Thanks, That is different than the one I getting in soon.

Ed
The Cold Solder Joint.

Never let being a responsible adult get in the way of passion and curiosity.

Report message to a moderator

Re: 150 Combo Footswitch [message #27112 is a reply to message #27106]

Thu, 15 November 2018 08:38

rodak
Messages: 516
Registered: October 2001
Location: Georgia

Senior Member

Are you getting the rectangular one that came with the slant-front models, like this:

https://www.ebay.com/itm/273524403162

Either one should work with either kind of amp. The round ones are from the earlier plexi-front amps.

www.combo-organ.com

Report message to a moderator

Previous Topic:	Kasino Bass Head
Next Topic:	Footswitch for Vintage Kustom L1 30W (1970's)

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Thu Nov 07 20:57:25 EST 2024