VintageKustom.com: Repairing Kustom Amps

Home » VintageKustom.com » Repairing Kustom Amps » distortion on k200

Show: Today's Messages :: Polls :: Message Navigator

distortion on k200 [message #2785]

Wed, 04 June 2003 01:47

Anonymous

i recently acquired a k200-b (i think) and both channels have distortion in them, is there any way to remedy this and clean up the sound of this amp? if so how?

Report message to a moderator

Re: distortion on k200 [message #2788 is a reply to message #2785]

Wed, 04 June 2003 10:19

stevem
Messages: 4772
Registered: June 2004
Location: NY

Senior Member

Hi. If both chennels are like that, get a adapter from radio shack so you can plug into the RCA jack on the back of the amp, and run that into another amp. If that signal sounds clean than both preamp channels are ok and the problem lies in the output/ driver section of the amp. In either case preamp or output/ driver section problem, this will not be something you will beable to repair yourself unless you know how to trouble shoot soilid state electronics.

Report message to a moderator

Previous Topic:	Kustom 300 PA
Next Topic:	lack of volume

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Mon Sep 30 03:29:34 EDT 2024