VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Replacement Part Suggestions » frankinstein reverb pan info
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
frankinstein reverb pan info [message #3305] Mon, 08 December 2003 15:51
stevem is currently offline  stevem
Messages: 4748
Registered: June 2004
Location: NY
Senior Member
Hi to all, sorry it has taken so long,I finaly got into my frankbrow head and the proper replacement pan for that amp is a accutronics model 4fb3d1b. which can be had from the ampares site. If you want a listing of the acutronics pans in a simple chart, go to the duncan amp site, than to tech info, then to something about reverb, and scroll down to the chart.

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: I'm new to KUSTOM, HELP!
Next Topic: '95' series 'Frankenstein' Schematics
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Fri Jul 05 17:01:34 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software