VintageKustom.com: Replacement Part Suggestions

Home » VintageKustom.com » Replacement Part Suggestions » knobs and handles

Show: Today's Messages :: Polls :: Message Navigator

knobs and handles [message #19]

Fri, 07 April 2000 22:21

BC
Messages: 583
Registered: March 2000
Location: Kentucky

Senior Member

Replacement parts are always needed and after you buy a few Kustom heads and cabs you find out you need at least one handle and a knob or two. Both of these parts are not exact but close replacements......use them on the player rigs and most people will never know. Radio Shack sells rplacement knobs under part #274-416A that is very close and looks like what is used on the "new" Kustom heads. They also sell a smaller knob like the ones seen on the effects of the 250 heads. The knobs on my 4001 Rickenbacker basses look exactly like the old Kustom knobs on 200s......but if you order from them make sure they are not labeled volume and tone. I do not know their part numbers. Handles can be obtained from vibroworld.com under part #88-095222-005. These are clear instead of black plastic....but I have seen clear on 3 Kustoms and they were either original or had been replaced long ago! John Compton has used these and says they look good and fit very well.

Report message to a moderator

[Message index]

		knobs and handles By: BC on Fri, 07 April 2000 22:21
		Re: knobs and handles By: KustomDan on Tue, 06 June 2000 19:27
		Re: knobs and handles By: Anonymous on Wed, 14 February 2001 00:58
		Re: knobs and handles By: Anonymous on Wed, 14 February 2001 01:33
		Re: knobs and handles By: Anonymous on Wed, 14 February 2001 21:47
		Re: knobs and handles By: Anonymous on Fri, 16 February 2001 22:21
		Re: knobs and handles By: BC on Sat, 17 February 2001 02:09
		Re: knobs and handles By: Anonymous on Sat, 17 February 2001 21:07
		Re: knobs and handles By: GaryH on Tue, 20 February 2001 13:52
		Re: knobs and handles By: RoyC on Tue, 20 February 2001 17:34
		Re: knobs and handles By: Jc on Tue, 20 February 2001 23:09
		Re: knobs and handles By: Anonymous on Thu, 22 February 2001 20:54
		Re: knobs and handles By: johns33dodge1 on Sat, 18 February 2006 00:28
		Re: knobs and handles By: GaryH on Fri, 23 February 2001 19:52
		Re: knobs and handles By: Anonymous on Sat, 24 February 2001 02:12
		Re: knobs and handles By: GaryH on Tue, 27 February 2001 14:54
		Re: knobs and handles By: Jc on Tue, 27 February 2001 19:01
		Re: knobs and handles By: KustomDan on Wed, 28 February 2001 22:55
		Re: knobs and handles By: BC on Mon, 05 March 2001 21:11
		Re: knobs and handles By: Anonymous on Mon, 12 March 2001 00:45
		Re: knobs and handles By: Jc on Wed, 28 March 2001 12:12
		Re: knobs and handles By: GaryH on Wed, 28 March 2001 13:04
		Re: knobs and handles By: Anonymous on Tue, 03 April 2001 20:16
		Re: Handles By: Anonymous on Tue, 10 April 2001 12:33
		Re: Handles By: KustomDan on Wed, 11 April 2001 22:12
		Re: knobs and handles By: bhall on Wed, 16 January 2008 13:24
		Re: knobs and handles By: Parsons on Thu, 09 January 2014 19:01
		Re: knobs and handles By: Kustom_Bart on Mon, 27 January 2014 04:14

Previous Topic:	Knobs
Next Topic:	Help with a Kustom 100 SC amplifier.

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Wed Nov 06 09:39:54 EST 2024