VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » Classified Ads » Wanted » Looking For K200A Chassis Brace/Bracket
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
Looking For K200A Chassis Brace/Bracket [message #24261] Sun, 27 December 2015 19:08
mister honey is currently offline  mister honey
Messages: 38
Registered: January 2014
Location: eastern blowville heights...
Member
Before I make one of these from McMaster Carr aluminum tubing, can you guys check your junk boxes for one of these chassis brace or brackets?

I need one to suit a K200A (narrow) chassis and it measures 8-1/4 inch long.

A K200B chassis brace would be about 1/2 inch longer, I think.

Thanks for your help with this!

Mike

http://i273.photobucket.com/albums/jj219/mister_honey/K200A_zpsx3q8aqg8.jpg

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: WTB Kustom K-200 Bass Guitar Trapeze Tailpiece
Next Topic: voltage information
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Mon Nov 18 08:05:30 EST 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software