VintageKustom.com: Repairing Kustom Amps

Home » VintageKustom.com » Repairing Kustom Amps » Push/ Pull Pot (Repair)

Show: Today's Messages :: Polls :: Message Navigator

Push/ Pull Pot [message #28256]

Thu, 24 June 2021 07:44

jammy5152
Messages: 62
Registered: May 2018
Location: Georgia

Member

Looking for a Push/Pull Potentiometer for a K-50 Guitar Amplifier
Controls the Tremelo-Vibrato via Foot Switch

Report message to a moderator

Re: Push/ Pull Pot [message #28257 is a reply to message #28256]

Thu, 24 June 2021 14:25

stevem
Messages: 4775
Registered: June 2004
Location: NY

Senior Member

Tubes and more has them , but the shaft is 1 3/8" long so you will have to hack saw it shorter while being careful not to get the cuttings into the pot.

The part number is R-VS-500KA.

Report message to a moderator

Re: Push/ Pull Pot [message #28259 is a reply to message #28257]

Thu, 01 July 2021 12:30

C4ster
Messages: 686
Registered: June 2001
Location: Mukwonago, WI (Milwaukee...

Senior Member

The pot you spec'd is a rotary switch. Would not work as a trem/vib switch. There are shorter knurled multi section push/pull switches that seem to be a better choice.
Conrad

Report message to a moderator

Previous Topic:	Repairing Kustom 1-B
Next Topic:	Need help with my k200b-1

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Wed Nov 13 09:11:47 EST 2024