VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » VintageKustom.com » Repairing Kustom Amps » Kustom 100 blowing fuse (Kustom 100 )
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Re: Kustom 100 blowing fuse [message #27361 is a reply to message #18016] Thu, 06 June 2019 15:34 Go to previous messageGo to previous message
chicagobill
Messages: 2006
Registered: April 2003
Senior Member
C2 is not polarized, so it shouldn't matter how it is inserted into the board.

Does your meter have a diode test setting? If it does use it to check for continuity from the output transistor cases to the chassis. If the transistors are not connected to the rest of the circuit, there will be no reading between the case and the chassis. If the red wires are connected to the transistors, there will be a slowly rising reading as the filter caps will be charged by the meter battery.

No matter what, there should not be a steady zero ohm reading from the case to the chassis.

Steve, if you are going to walk him through this repair, I will defer to you. He is getting too many instructions to follow and he is bound to get mixed messages from too many of us.
[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: K200A-1 Power Amp Rescue Needed
Next Topic: Kustom III lead pc board 5065 rev2
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Wed Nov 06 18:57:37 EST 2024