VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » VintageKustom.com » Repairing Kustom Amps » A-4 Repair (Unwanted distortion)
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Re: A-4 Repair [message #26509 is a reply to message #26502] Mon, 29 January 2018 08:18 Go to previous messageGo to previous message
stevem is currently offline  stevem
Messages: 4775
Registered: June 2004
Location: NY
Senior Member
The schematic for the 702 driver/ power does not call for a 4.7 ur cap anywhere, nor 4 resistors in series!
I would guess that those resistors are in the biasing network of one of the output transistors which is making for the issue of low wattage.
Does that board still have 4 rectangular resistors on it that are about 1 inch long and 3/8s or so in diameter?
If the values for resistors R717 , 718,725 and 726 are not dead on 1 ohm and if the values of R 716,715,724 and 723 are not dead on 100 ohms then the output stage goes south wattage wise real fast!
[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Kustom 300 PA head needs repair
Next Topic: Kombo I organ keyboard contacts access
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Sat Nov 16 18:10:34 EST 2024