VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » VintageKustom.com » Comment Board » Kasino 200 4x12 w/ built in power amp?
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Kasino 200 4x12 w/ built in power amp? [message #29206] Mon, 25 December 2023 12:57 Go to previous message
raygehringer is currently offline  raygehringer
Messages: 2
Registered: December 2023
Junior Member
Merry Christmas and Happy Holidays from a new member, Ray.

My son got a real flea market find for Christmas and hopefully there is some info available. It is an old Kasino amp. The only marking on it is a badge that simply reads 200 on the front grill cloth. There is a built in solid state power amp that is inserted through the back amp panel and screwed in. On the back is a metal plate that only gives electronics info.
Output = 100watts Primary = 120V FREQ=60Hz. INPUT=1.8Amps
I don't have a power chord for it nor would I have plugged it in if I did.

When I took the full back panel off and disconnected the speaker leads from the amp to the speaker jumper strip there was a white Kustom Amp stamp in the junction between all four speakers.

The speakers don't have a brand name on them but have the following info stamped on them:
5 8122 18
8 OHM
137 7138
038-0011-00

I guess the 1st question I have is does anyone know what exactly do I have? I could not find a single piece of info on this particular piece anywhere.

2nd question is can the cabinet as is it is without the solid state power amp powered up be used passively?

Any historic or functional info on this amp/cab would be GREATLY appreciated.

Merry Christmas and Happy Holidays,
Ray
[Message index]
 
Read Message
Read Message
Read Message
Read Message
Previous Topic: Kustom 200 head with a 100 2-12" cabinet
Next Topic: Kustom 200 "Overload" switches?
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Fri Nov 01 11:06:27 EDT 2024