VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » VintageKustom.com » Comment Board » Ohms
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Re: Ohms [message #18861 is a reply to message #18858] Wed, 12 June 2013 12:16 Go to previous messageGo to previous message
chicagobill
Messages: 2005
Registered: April 2003
Senior Member
Pleat, the 2X15+siren cabs will not be the same as a 3X15 cab impedance wise. The siren or horns are blocked with the crossover cap so they only show the impedance of the two 15s, so 8 ohms.

All of the original 4X12 square cabs that I have seen were wired with four 16 ohm speaker in parallel for a total load of 4 ohms.

The vertical PA cabs were wired differently. Which type of cab do you have?
[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: 4-12E
Next Topic: K-100 Bass
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Fri Sep 27 06:27:30 EDT 2024