VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Repairing Kustom Amps » K200 B Head
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
K200 B Head [message #5592] Sat, 12 March 2005 19:25 Go to next message
Blueswaite
Messages: 14
Registered: August 2003
Junior Member
When i play a chord as the sound starts to die down There is a distored or buzzy sound until sound totally dies out. Any ideas.
Thanks

Report message to a moderator

Re: K200 B Head [message #5598 is a reply to message #5592] Tue, 15 March 2005 10:46 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4773
Registered: June 2004
Location: NY
Senior Member
could be bad speaker, or problem in the driver/output stage.

Report message to a moderator

Re: K200 B Head [message #5609 is a reply to message #5592] Sun, 20 March 2005 10:14 Go to previous messageGo to next message
Blueswaite
Messages: 14
Registered: August 2003
Junior Member
Thanks. My top 15 was blown. I was worried it was the amp.

Report message to a moderator

Re: K200 B Head [message #5610 is a reply to message #5609] Sun, 20 March 2005 12:43 Go to previous messageGo to next message
Blueswaite
Messages: 14
Registered: August 2003
Junior Member
I was wrong it must be in the amp it does it in my other cab now. Play a cord its real clean but as it dies of on the tale end there is a buzzing sound. I thought maybe the cab was virbrating but it does on my 2x12 cab. I think I'll have the speakers checked out. If they check ok then I'll have the head checked. Tried my super strea, my tele, and my ibanez sa.

Report message to a moderator

Re: K200 B Head [message #5615 is a reply to message #5592] Mon, 21 March 2005 08:39 Go to previous message
stevem is currently offline  stevem
Messages: 4773
Registered: June 2004
Location: NY
Senior Member
It sounds like crosssover distortion in the output stage, unless you have a osciliscope, or feel like just shot gunning in a fist full of new parts untill the problem stops, then take it to tech for repair.

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: EV SRO 15" speakers
Next Topic: NOISE
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Sat Nov 02 04:36:16 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software