VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Repairing Kustom Amps » Parts ID help on driver PCB
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
Parts ID help on driver PCB [message #2474] Sat, 22 February 2003 00:01
YoScotyboy
Messages: 2
Registered: November 2002
Junior Member
Just got a Woodson 150-1 (I know its not exactly a Kustom, but sort of right?), does anyone have a schematic for the driver PCB (#W9005), have quite a few cajun (you know, blackend) components and the two driver Trans. were repl. with non-heatsinked NTE's!!! Any help or a schematic would be great. Thanks.

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: Kustom V Pa
Next Topic: 24-L info needed
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Fri Aug 16 23:12:57 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software