VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Comment Board » Kustom 150-PA reverb problem (Trying to get the reverb on a Kustom 150 working)
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Re: Kustom 150-PA reverb problem [message #25934 is a reply to message #25931] Thu, 16 February 2017 14:04 Go to previous messageGo to previous message
shnaggle is currently offline  shnaggle
Messages: 8
Registered: February 2017
Junior Member
Ok, so I'm trying to figure out how to get to the inside of the unit, but I'm stumped with how to first remove the tuck and roll casing. There's two spherical discs on each long side held by screws which look to be at least part of what's holding the case. I've removed the screws, but the discs are still in place. Beyond that, I'm at a loss.

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Kustom Grille Cloth Minutiae
Next Topic: Kustom Kombo Rebuild
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Mon Nov 04 19:47:09 EST 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software