VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » VintageKustom.com » Repairing Kustom Amps » K150-6 pumps out DC voltage when powered on.
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Re: K150-6 pumps out DC voltage when powered on. [message #27745 is a reply to message #27744] Sat, 21 March 2020 15:10 Go to previous messageGo to previous message
chicagobill
Messages: 2006
Registered: April 2003
Senior Member
stevem wrote on Sat, 21 March 2020 11:26
It's a 1N3754.
Electronic parts outlet in the Netherlands has some for E7.50 each.

Do not operate the amp without atleast a 1n1004 or 7 in its place .
E7.50, Ouch!

A long time ago I started to test other diodes to use as a replacement for these diodes. Generally little glass diodes like 1N914 or 1N4148s seemed to work the best. The problem comes in mounting them in a way to get them to react to the heat of the output transistors.

If you don't want to buy the expensive NOS one, get a 1N914 type and solder two thin wires to the ends. Heat shrink the connections so that there is no chance of shorting out to the heat sink. Then using as thin a bead of silicon glue as you can, glue the diode to the center of the heat sink near the clip that held the original diode. Then run the wires to the pc board making sure that you keep the correct polarity.

This diode string ties the lower half of the power amp to the upper half. If the diode string breaks circuit, the upper half of the circuit turns fully on and will cause the power amp transistors to fail. So don't run the amp without the diode in place.
[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: K100 2 Questions
Next Topic: Reducing the high frequency hiss on Frankie heads
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Fri Nov 15 11:03:14 EST 2024