kustom 4x12 LS cab [message #27166] |
Tue, 22 January 2019 06:16 ![Go to next message Go to next message](/FUDforum/theme/vk30/images/down.png) |
Jobis
Messages: 3 Registered: January 2019
|
Junior Member |
|
|
Hello everybody,
I recently bought a 4x12 ls cab. Its hard to find any information about it.
Its loaded with cts speakers wich say 8 16. Ohm
I was wondering, does anybody know what the LS stand for?
Its a cab with tolex instead of t&r look but i believe from the same era.
Did kustom produced only 4x12 guitarcabs or also a bassversion?
Tnx
Job
|
|
|
Re: kustom 4x12 LS cab [message #27167 is a reply to message #27166] |
Tue, 22 January 2019 06:57 ![Go to previous message Go to previous message](/FUDforum/theme/vk30/images/up.png) ![Go to next message Go to next message](/FUDforum/theme/vk30/images/down.png) |
stevem
Messages: 4764 Registered: June 2004 Location: NY
|
Senior Member |
|
|
Hello!
LS stands for lead series as in made for guitar.
The cabinet was made to handle 125 watts of RMS power.
The cabinet should be wired to provide a 4 ohm load.
By the time your cabinet was made Kustom was owned by Baldwin piano and the tuck & roll covering was long gone!
A bass version 4-12 cab was never made.
[Updated on: Tue, 22 January 2019 07:00] Report message to a moderator
|
|
|
|
|
|
Re: kustom 4x12 LS cab [message #27171 is a reply to message #27170] |
Wed, 23 January 2019 06:10 ![Go to previous message Go to previous message](/FUDforum/theme/vk30/images/up.png) |
stevem
Messages: 4764 Registered: June 2004 Location: NY
|
Senior Member |
|
|
Kustom tuck & roll amps and the mid 70s tolex series without effects could be used for guitar or bass as the internals / circuits where the exact same!
You could rewire the cabinet and get mire than close enough to a 8 ohm load out of it.
[Updated on: Wed, 23 January 2019 06:14] Report message to a moderator
|
|
|