VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » VintageKustom.com » Repairing Kustom Amps » Kustom 100 C-6 (right side has no signal)
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Re: Kustom 100 C-6 [message #25890 is a reply to message #25856] Fri, 10 February 2017 21:48 Go to previous messageGo to previous message
chicagobill
Messages: 2005
Registered: April 2003
Senior Member
The first question would be are you certain the new transistor is installed correctly?

Do you feel confident in working on the amp while it is plugged in and turned on? If you do, then the next step would be to start taking dc voltage readings and compare them with the values marked on the schematic.

If not, can you meter test the rest of the transistors on the board?
[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Help
Next Topic: Turn on Thump and turn of "pop" K100C-8
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Tue Jul 16 10:02:38 EDT 2024