Kustom Amp and PA [message #19904] |
Sun, 05 January 2014 10:44 |
Blueswaite
Messages: 14 Registered: August 2003
|
Junior Member |
|
|
Must have been in a mood for Kustoms of past.
Picked up a K200 B1 Head and a 2X15 cab. Head in real good shape and very clean inside. SN 55174. The cab we opened had square magnets with CTS on them on back cab jack plate has CTS on it. I believe there the bass speakers but not sure sounds good thou.
PA is a 200 4 inputs Vol. Bass Treb and Reverb on each channel
In very good shape. Cabs have what looks to be 3x10's and a horn
in good shape. Head SN 67510. Cab SN24946. Have CTS on Jack Plates on bottom of cabs. There is another 1/4 in jack up by the horn on each cab not sure what this is for. Only thing not working on the head is the reverb
got Amp and Pa yesterday.
[Updated on: Sun, 05 January 2014 10:57] Report message to a moderator
|
|
|
|
|
Re: Kustom Amp and PA [message #19927 is a reply to message #19911] |
Mon, 06 January 2014 10:18 |
C4ster
Messages: 686 Registered: June 2001 Location: Mukwonago, WI (Milwaukee...
|
Senior Member |
|
|
I have 2 K100 amps that came with 1 15" CTS speaker. I did find the 15" CTS's were rather dull in tonal quality. I cannot comment directly to the 2x15 cabinet but I would think that the CTS speakers were lacking in either configuration. I also have a 2x12 CTS cabinet that is great for both bass and guitar but that doesn't directly address your comment either. I have since replaced the CTS's with JBL E140 speakers and they sound fantastic. However, that change added quite a bit of weight but the sound is worth it.
Conrad
|
|
|