VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » VintageKustom.com » Replacement Part Suggestions » More Diode Substitution Info (Diode cross reference)
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
More Diode Substitution Info [message #21622] Fri, 03 October 2014 09:40 Go to next message
Jerrybass1955 is currently offline  Jerrybass1955
Messages: 45
Registered: August 2014
Location: NC
Member
Hi Folks,

I'm having a bit of a struggle with 1/2 of the power section of my K100-pre-rev-3 and I am starting to suspect perhaps an issue with the bias diodes. They check out as diodes in-circuit, but it is looking like time to pull them and check them out. So a few questions:

1) My diodes CR104 and CR105 are in metal cans with a diode symbol on them. One leg is connected to the cathode (if I remember correctly). Is this consistent with a 1N3139 as you guys are familiar with?
2) If not, what are they?
3) If so, does anyone know what a good sub would be other than the NTE sub?
4) The same NTE116 is a general purpose diode that appears to sub for some of the 1N4000 series like 1N4003-1N4007?

In similar circuits I have seen, such bias diodes appear to just be general purpose diodes (as is the NTE116). I have some 1N4007s (specs seem similar except for max Vf), and I may need to try them unless someone has a better suggestion or can add to the common knowledge to expand the table below. But if it indeed isn't the diodes, I don't want to make other problems or make finding the problem even harder.

Looks like we know the following:

007-6004-00 / FD111 / nte177 / 1N4148/ Silicon Diode
007-6005-00 / 1N3193 / nte116 / Silicon Diode
007-6006-00 / 1N3754 / nte5801 / Silicon Diode
007-6016-00 / Silicon Diode
007-6020-00 / 1N270 / nte109 / Germanium Diode
007-5349-00 / 1N5349 /nte5127A / 12v 5w Zener Diode

Any help appreciated. I will likely post about the power amp problem soon for more opinions. Currently driving me crazy (more of a putt than a drive in my case).
Jerry
Re: More Diode Substitution Info [message #21641 is a reply to message #21622] Fri, 03 October 2014 20:55 Go to previous messageGo to next message
chicagobill
Messages: 2006
Registered: April 2003
Senior Member
The 1N3139 is the axial version of the radial 1N3754 diode. Use a 1N4148 to replace them.
Re: More Diode Substitution Info [message #21648 is a reply to message #21641] Sat, 04 October 2014 09:15 Go to previous message
Jerrybass1955 is currently offline  Jerrybass1955
Messages: 45
Registered: August 2014
Location: NC
Member
More good info Bill.

I was surfing the web yesterday and found "Surplus Sales of Nebraska". They have 1N3193's for sale at 1.50 each (no 3754s) and also carries most of the 1% resistors I have seen used in Kustom Amps. Worth a look if you want to do some exact restorations.

I also bought some 2N4249's from this guy:
MISTER SPROCKETS
19392 FRANCISCA WAY
YORBA LINDA, CA 92886
He is on Ebay and the transistors are used pulls, but he is good to do business with and you gotta love a guy whose Ebay handle spacelysprockets00 !!! I has a few bad transistors which he found unusual so he quarantined his batch and tested them all and sent me extras in addition to replacements.

Jerry
  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: Kustom Semiconductor Replacements
Next Topic: bass port tubes
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Sun Nov 17 11:33:01 EST 2024