VintageKustom.com: Repairing Kustom Amps » Removing Amp Section From K-150

Home » VintageKustom.com » Repairing Kustom Amps » Removing Amp Section From K-150

Show: Today's Messages :: Polls :: Message Navigator

Removing Amp Section From K-150 [message #9105]

Tue, 01 January 2008 09:19

Thunderchief
Messages: 3
Registered: December 2007

Junior Member

I need to get into the amp section of a K-150. Are there screws accessible from the bottom of the amp shelf inside the speaker cabinet or is the amp secured some other way? Confused

I figure it slides out the back of the combo once its mounting is released. Any suggestions?

Report message to a moderator

Re: Removing Amp Section From K-150 [message #9106 is a reply to message #9105]

Tue, 01 January 2008 09:46

rodak
Messages: 516
Registered: October 2001
Location: Georgia

Senior Member

Yes, I believe there are four screws underneath the amp chassis. You'll have to remove the back first to get at them.

www.combo-organ.com

Report message to a moderator

Re: Removing Amp Section From K-150 [message #9107 is a reply to message #9105]

Tue, 01 January 2008 09:55

Thunderchief
Messages: 3
Registered: December 2007

Junior Member

Thats what I figured. I believe the back has been siliconed in place the secure it. Looks like I'm gonna have fun. Mad

Report message to a moderator

Re: Removing Amp Section From K-150 [message #9109 is a reply to message #9105]

Tue, 01 January 2008 18:56

Thunderchief
Messages: 3
Registered: December 2007

Junior Member

Not as bad as I expected. Only the top of the back panel was siliconed. It broke loose fairly easily. Sprayed the pots with contact cleaner. Thumping just like it always has. Very Happy

Thanks for the info.

Report message to a moderator

Previous Topic:	Speaker Preservation and Protection Question ?
Next Topic:	K250-4 Treble Pot Value

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Sun Nov 17 10:32:52 EST 2024