VintageKustom.com: Repairing Kustom Amps

Home » VintageKustom.com » Repairing Kustom Amps » K100 2 Questions (K100 2 1/2 volume and hiss)

Show: Today's Messages :: Polls :: Message Navigator

K100 2 Questions [message #27723]

Tue, 10 March 2020 21:49

Dutleydurite
Messages: 3
Registered: March 2020

Junior Member

Hello all! I have replaced several of the input transistors with 2N3904 transistors. I have some volume, not just the faint signal I started with. I had to carefully dial the volume to around 10 o'clock at the start. The amp sounds farty and has little volume even when turned all the way up. Amp hissing is pretty significant at peak volume. I don't read schematics well. It's a pc104 board. I'm needing some help as I don't have somewhere to take it to. Thanks in advance.

Report message to a moderator

[Message index]

		K100 2 Questions By: Dutleydurite on Tue, 10 March 2020 21:49
		Re: K100 2 Questions By: stevem on Wed, 11 March 2020 06:54
		Re: K100 2 Questions By: Dutleydurite on Wed, 11 March 2020 19:25
		Re: K100 2 Questions By: stevem on Thu, 12 March 2020 06:20
		Re: K100 2 Questions By: Dutleydurite on Sat, 14 March 2020 20:16
		Re: K100 2 Questions By: stevem on Sun, 15 March 2020 06:28

Previous Topic:	Kustom 250-4
Next Topic:	K150-6 pumps out DC voltage when powered on.

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Thu Oct 31 08:01:10 EDT 2024