VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Replacement Part Suggestions » Original footswitches?
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
Original footswitches? [message #1053] Wed, 28 November 2001 21:38 Go to next message
knatem
Messages: 1
Registered: November 2001
Junior Member
I have K-100 head w/the tremolo and reverb. Were there footswitches that came w/this head? What would be a good alternative? thanks.

Report message to a moderator

Re: Original footswitches? [message #1054 is a reply to message #1053] Wed, 28 November 2001 22:54 Go to previous messageGo to next message
KustomBlues
Messages: 494
Registered: June 2001
Location: Michigan
Senior Member
A peavey (ugh) footswitch, 2 button with a stereo 1/4" plug on it will work just fine. If hard pressed, I can supply you with an item number...... :-)

Report message to a moderator

Re: Original footswitches? [message #1075 is a reply to message #1054] Sun, 02 December 2001 10:33 Go to previous messageGo to next message
Anonymous
I would be sure that the switches are single pole single throw. A lot of the newer replacements use a momentary type to activate a switching circuit in the amps. Don

Report message to a moderator

Re: Original footswitches? [message #3927 is a reply to message #1075] Wed, 24 March 2004 16:46 Go to previous messageGo to next message
analogist
Messages: 1
Registered: March 2004
Junior Member
Would this same switch setup work for a Commander? Or would I even need one, as there's only one channel - no "overdrive" alternate or anything.

Report message to a moderator

Re: Original footswitches? [message #3932 is a reply to message #3927] Wed, 24 March 2004 22:18 Go to previous message
pleat is currently offline  pleat
Messages: 1454
Registered: June 2004
Location: Belding, Mi
Senior Member
A dual footswitch would operate the reverb and trem on the commander. Don

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: Power switch
Next Topic: K200B 5
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Fri Nov 08 01:54:42 EST 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software