VintageKustom.com: Replacement Part Suggestions » handles

Home » VintageKustom.com » Replacement Part Suggestions » handles (new handles for the cabinets)

Show: Today's Messages :: Polls :: Message Navigator

handles [message #27943]

Sat, 26 December 2020 21:28

RPatt
Messages: 7
Registered: December 2020

Junior Member

Hey guys, thanks for letting me join. I don't know how to down load pictures from my computer yet but I thought that I'd contribute to the group. I recently acquired a pair of vintage Kustom PA speakers. The kind that has two 15" speakers and a Altec like horn at the top. They need a lot of TLC so this group probably will come in handy. I haven't read all the postings about handles yet so if someone has already post this information, just disregard mine. I just wanted to let you know that you can get brand new replacement handles that are exactly like the old ones if you go to etsy.com. If you type in the search bar "vintage suit case handles", you'll find all different kinds. Two vendors there sell the black handles like the Kustoms. One vender sells them for about $2.00/piece. "The other vendor sells them for about $6.00/piece. Like I said, if I could down load pictures, I could show you side by side comparisons.

Report message to a moderator

Re: handles [message #27950 is a reply to message #27943]

Wed, 30 December 2020 10:55

oren hudson
Messages: 274
Registered: March 2008
Location: Gastonia, NC

Senior Member

Welcome to the joint and congrats on the score. There is no way to post pics on this site. I've located the handles that you referenced and they look like pretty much the same as the originals. I've ordered some, so thanks for the heads up. Smile

Smile

Report message to a moderator

Re: handles [message #27951 is a reply to message #27950]

Wed, 30 December 2020 11:07

RPatt
Messages: 7
Registered: December 2020

Junior Member

the thing I found out when it comes to repairing or restoring old amplifiers is, a lot of the parts are still being made today.

Report message to a moderator

Re: handles [message #27952 is a reply to message #27951]

Sun, 03 January 2021 10:27

oren hudson
Messages: 274
Registered: March 2008
Location: Gastonia, NC

Senior Member

You're right. Sometimes just finding them is the roadblock.

Report message to a moderator

Re: handles [message #27959 is a reply to message #27943]

Tue, 12 January 2021 21:25

oren hudson
Messages: 274
Registered: March 2008
Location: Gastonia, NC

Senior Member

The handles from Etsy arrived today, 1/12/21. I'm happy to report that they are exactly like the originals. Took a few days to get here, but well worth the wait. Smile

Smile

[Updated on: Tue, 12 January 2021 21:30]

Report message to a moderator

Re: handles [message #27960 is a reply to message #27943]

Wed, 13 January 2021 07:14

stevem
Messages: 4775
Registered: June 2004
Location: NY

Senior Member

Sweet!

I have 8 on order also.

Report message to a moderator

Re: handles [message #27987 is a reply to message #27959]

Mon, 08 February 2021 03:02

Jo Nathan
Messages: 4
Registered: January 2021

Junior Member

Hey,
Please shoot me a message with the link to those handles. I need at least 8 of them. Smile

Smile

Report message to a moderator

Re: handles [message #27996 is a reply to message #27943]

Mon, 08 February 2021 13:59

stevem
Messages: 4775
Registered: June 2004
Location: NY

Senior Member

Just go to the Esty site as that's who carrys them.

Report message to a moderator

Re: handles [message #27997 is a reply to message #27996]

Mon, 08 February 2021 18:20

Cody UNO
Messages: 35
Registered: February 2021

Member

I did the search exactly as you suggested in a previous reply and nothing came up. That's why I was hoping you could just shoot me the link.

Report message to a moderator

Re: handles [message #28002 is a reply to message #27943]

Tue, 09 February 2021 06:18

stevem
Messages: 4775
Registered: June 2004
Location: NY

Senior Member

Do search for Esty replacement handles and it comes right up!

Report message to a moderator

Re: handles [message #28010 is a reply to message #27997]

Tue, 09 February 2021 14:29

RPatt
Messages: 7
Registered: December 2020

Junior Member

make sure you type "vintage suitcase handles" in the search box and you'll find them

Report message to a moderator

Re: handles [message #28028 is a reply to message #27943]

Mon, 15 February 2021 04:12

Cody UNO
Messages: 35
Registered: February 2021

Member

Hey,
I found them! Ordered several. Maybe I'll break even from selling the 3 originals I have that are still intact. Smile

Smile

Report message to a moderator

Re: handles [message #28084 is a reply to message #28028]

Fri, 05 March 2021 21:47

Cody UNO
Messages: 35
Registered: February 2021

Member

Update: I ordered 8 of these handles off of Etsy and they arrived today. They are exact replacements and I plan on ordering 8 more of them tonight. Thank you again for the suggestions. This website is absolutely amazing and I cannot express my gratitude enough for all of your suggestions and help.

Report message to a moderator

Re: handles [message #28108 is a reply to message #27943]

Fri, 12 March 2021 13:22

DocWaxham
Messages: 46
Registered: October 2018

Member

Hey all. I found some handles on etsy also from a company called likebags. They do come from China wasn't happy with that but they got here and they are a very close replacement. They come in packs of 5 for like $8 plus shipping. Total under $20. Go to Etsy search for likebags. If you still have hardware the plastic inserts fit as well.

Report message to a moderator

Re: handles [message #28111 is a reply to message #28108]

Sat, 13 March 2021 03:09

Cody UNO
Messages: 35
Registered: February 2021

Member

They are $2.20 each plus shipping. Not sure how you got them for $12 shipping unless you only got a couple. I ordered over a dozen so that may explain it.

Report message to a moderator

Re: handles [message #28114 is a reply to message #28002]

Sat, 13 March 2021 13:00

DocWaxham
Messages: 46
Registered: October 2018

Member

$17.87 total with shipping. 5 handles total. Why do people always have to try to discredit what you say especially here. We are all only trying to pass information to help others. I can send you a copy of my receipt if you want.

Report message to a moderator

Re: handles [message #28115 is a reply to message #27943]

Sat, 13 March 2021 18:00

RPatt
Messages: 7
Registered: December 2020

Junior Member

it's kind of amusing that a lot of musicians have viewed this post. Apparently, the original handles were breaking all the time. As far as I can tell, the only difference between the old ones and the new ones is, the old ones used a brad while the new ones use a screw. If these are prone to break, maybe it would be a good idea to take them apart and reinforce the screw posts with some kind of epoxy dough. That's great that the plastic insert fits the old hardware if you want to keep things as original as possible. I figure, once again you could fill the screw holes with JB weld or some other epoxy and set the brad into the glue before it hardens.

Report message to a moderator

Re: handles [message #28120 is a reply to message #28114]

Wed, 17 March 2021 04:50

Cody UNO
Messages: 35
Registered: February 2021

Member

Why do you have to have a bad attitude when you clearly misunderstood what I wrote? I wasn't discrediting anything. Maybe you should stop being such a jerk and actually read what I wrote again. I simply stated that you got it for a cheaper price because of the quantity. There's no reason for you to have that negativity especially when you wouldn't act that way to my face.

So what you call "passing information" is falsely accusing me of something because you don't know how to read? Let's look over what I wrote again.

"Not sure how you got them for $12 shipping unless you only got a couple. I ordered over a dozen so that may explain it."

You admitted yourself that you only ordered five of them. Which was exactly what I was suggesting.

[Updated on: Wed, 17 March 2021 04:59]

Report message to a moderator

Re: handles [message #28245 is a reply to message #27943]

Mon, 07 June 2021 21:13

RPatt
Messages: 7
Registered: December 2020

Junior Member

Hey! My post made it to over 5000! That's cool. Must be a lot of broken Kustom handles out there.

Report message to a moderator

Re: handles [message #28246 is a reply to message #28245]

Tue, 08 June 2021 07:07

stevem
Messages: 4775
Registered: June 2004
Location: NY

Senior Member

There where a boat load of tuck & roll Kustoms made and every one that was not a just a head had atleast one handle on it .

Report message to a moderator

Re: handles [message #28326 is a reply to message #27943]

Sat, 11 September 2021 15:26

Doombuggy!
Messages: 3
Registered: September 2021

Junior Member

Im not finding these handles I need 4 of them for some PA speakers

Report message to a moderator

Re: handles [message #28329 is a reply to message #28326]

Sun, 12 September 2021 07:24

stevem
Messages: 4775
Registered: June 2004
Location: NY

Senior Member

I use duck duck go to search and I typed in Esty vintage suite case handles and they came right up!!
They have them in many colors .

Report message to a moderator

Re: handles [message #28332 is a reply to message #28329]

Sun, 12 September 2021 10:34

pleat
Messages: 1454
Registered: June 2004
Location: Belding, Mi

Senior Member

https://www.etsy.com/listing/606915618/plastic-handle-15cm-b lack-silver-box?ref=related-2 is the link for the handles.

Report message to a moderator

Re: handles [message #28406 is a reply to message #27943]

Tue, 21 December 2021 19:56

RPatt
Messages: 7
Registered: December 2020

Junior Member

Hey! I can't believe this post topped 10,000. I'm so glad I could help so many people. I'm no body from nowhere.

Report message to a moderator

Previous Topic:	Legend Amplification replacement knobs
Next Topic:	Looking for help with a 150 4x10 with Trem-Vibe

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Sun Nov 17 19:26:46 EST 2024