VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Comment Board » Speakers (Cabinet impedance )
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
Speakers [message #28617] Mon, 13 June 2022 16:59
stevem is currently offline  stevem
Messages: 4775
Registered: June 2004
Location: NY
Senior Member
Hi all!

I stumbled on info about Kustom cabinets on the EL34 world site that has some wrong info in it.

Under the schematic listing they have there for Kustom amps they have a number 13 listing call Speaker configuration.

In that listing is stated that the 3 driver type cabinets are 2.7 ohms, which would call for 8 ohm drivers which is not correct.
All the 3 driver cabinets had 16 ohm drivers which made for a 5.3 ohm load.

[Updated on: Mon, 13 June 2022 17:00]

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: Round 2-button foot switch
Next Topic: 150 PA column
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Sat Nov 16 17:21:08 EST 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software