VintageKustom.com: Replacement Part Suggestions

Home » VintageKustom.com » Replacement Part Suggestions » K200B-6 (Loud pop in speakers when amp is powered on)

Show: Today's Messages :: Polls :: Message Navigator

Re: K200B-6 [message #27508 is a reply to message #27505]

Wed, 18 September 2019 06:37

stevem
Messages: 4773
Registered: June 2004
Location: NY

Senior Member

Well that may be leaking D.C. Voltage and making for that bang at power up.

For all of the well less then bucks that these 2N3055 output Transistors cost each to day I would get a pair of them like the NTE131MP and install a new one on each side of the amps thermal cut off switch that sits between them and see if that clears up the issue, as., there far cheaper then new computer grade main can filters !

This will help to keep the output stage balanced for lower distortion and low output hum levels.

Report message to a moderator

[Message index]

		K200B-6 By: aeroboy47 on Mon, 16 September 2019 11:08
		Re: K200B-6 By: stevem on Tue, 17 September 2019 06:06
		Re: K200B-6 By: aeroboy47 on Tue, 17 September 2019 16:40
		Re: K200B-6 By: stevem on Wed, 18 September 2019 06:37
		Re: K200B-6 By: aeroboy47 on Wed, 18 September 2019 11:16
		Re: K200B-6 By: stevem on Wed, 18 September 2019 12:01
		Re: K200B-6 By: aeroboy47 on Thu, 19 September 2019 13:25
		Re: K200B-6 By: rodak on Thu, 26 September 2019 16:08
		Re: K200B-6 By: stevem on Fri, 27 September 2019 05:43
		Re: K200B-6 By: rodak on Mon, 10 February 2020 15:49
		Re: K200B-6 By: stevem on Tue, 11 February 2020 08:58
		Re: K200B-6 By: rodak on Tue, 11 February 2020 10:36
		Re: K200B-6 By: stevem on Wed, 12 February 2020 05:54

Previous Topic:	Hustler Reverb Tank
Next Topic:	Grill Cloth Replacement

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Mon Oct 28 13:57:25 EDT 2024