VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » Classified Ads » For Sale » K100-1 (working head only)
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
K100-1 [message #18151] Wed, 06 February 2013 09:41
stevem is currently offline  stevem
Messages: 4775
Registered: June 2004
Location: NY
Senior Member
late 1968 K100-1 HEAD ONLY, NO CABINET.
Great working head with orignal knobs and power cord.
Head is all orignal but for these items.

Installed heat sinks on driver transistors.
Replaced broken .0047 cap across normal channel input jacks.
Installed non solder in type fuse holder on top of factory fuse holder.
Unit has a cracked plexiglass face plate that I glued. The crack runs from the 9 o`clock position on the brite channals volume control to the left side of the plexi panel, this repair left the crack looking like a scratch and not a crack.
I serviced the unit by cleaning and lubing all the pot`s and doing the same to the 4 switches in each input jack.
Unit runs nice and quite and outputs its rated clean wattage.
Nice unit to use for gigging where you would leave a primo amp home.
For pictures please email me or call.
Steven smag25ra5@yahoo.com 914 420 4356
price is 125 and you pay shipping.

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: Complete Kustom PA for sale
Next Topic: K-150 Guitar Amp For sale
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Sat Nov 09 13:17:51 EST 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software