VintageKustom.com: Comment Board

Home » VintageKustom.com » Comment Board » Kustom 150 PA (Have one )

Show: Today's Messages :: Polls :: Message Navigator

Kustom 150 PA [message #26192]

Wed, 14 June 2017 22:38

dukbut
Messages: 2
Registered: June 2017
Location: salt lake city

Junior Member

I just discovered this forum. I have a Kustom 150 PA sitting out in my garage, I have not used it for several years. I always enjoyed it, but though it was of no real interest to anyone but me. This forum tells me otherwise, is it a desirable piece of equipment? Is there interest in this model? It works well, everything but the reverb, last I used it to announce a small parade in my home town. Talk to me about this PA.

Report message to a moderator

Re: Kustom 150 PA [message #26193 is a reply to message #26192]

Thu, 15 June 2017 06:07

stevem
Messages: 4778
Registered: June 2004
Location: NY

Senior Member

Welcome to the place!
If you go to this site's Literature section, and then the PA section you will find the original advertisement and info for the 150 PA system.
Your non working Reverb may be due to a few things ,the most common the Reverb lock set that these metal face amps had.
The foam pad that goes up against the pans Reverb springs rots with age , falls off and keeps the two springs from vibrating.
The next most common failure is 1 of the 4 very small wires brakes off from the pans RCA connectors and needs to be soldered back on.

Report message to a moderator

Re: Kustom 150 PA [message #26194 is a reply to message #26193]

Thu, 15 June 2017 13:38

dukbut
Messages: 2
Registered: June 2017
Location: salt lake city

Junior Member

Thanks so much for your quick response. I will check your recommendations.

Report message to a moderator

Previous Topic:	Tell me about Kustom Sidewinders
Next Topic:	150 PA amp head

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Thu Dec 26 15:35:49 EST 2024